Looking for the perfect gift for a sewing lover in your life? Check out this list of sewing gifts that your loved one will actually want (no mugs with cheesy messages here!).
Read MoreHow to Make Holiday Wreaths
This week, I was feeling a bit blue contemplating the long cold winter to come, so I decided to ask my friend Tammy of Nettle, a floral design shop in NYC, for some tips on making festive wreaths to brighten up the décor at my house. She was overflowing with great advice, so I thought I would turn over the floor to her so everyone can benefit from her fantastic tips and tricks. Without further ado, here’s Tammy…
One of my favorite activities to do in December is making wreaths. Wreaths can actually be made any time of year, but the holidays feel like an especially appropriate time to get festive with wreath decor options. I personally love all of the glitter and metallic decor elements that can be found this time of year.
Usually, I would go to the flower market on 28th street in New York to buy materials for my wreaths, but this time I wanted to make wreaths with materials that would be widely available to everyone, so I decided to shop for materials at Trader Joe’s and Michaels. I enjoy making wreaths so much, I couldn’t settle on just one design, so I made two, each with its own style.
Evergreen Holiday Wreath
First, I dressed up a traditional evergreen wreath with all of the gold and glitter that you would expect during the Christmas season:
To make this wreath, I started with a pre-made evergreen wreath that I bought from Trader Joe’s. Since the wreath is already covered in greens, I only needed to add decorative accents – I added some twinkle lights, glittery ball ornaments, a huge bow made out of sparkly gold ribbon, and the most adorable fuzzy little bird. I also added a few sprigs of baby’s breath to give the illusion of snow on the greenery.
Modern Wreath
Second, I made a natural wreath that plays with pops of color and negative space:
For this wreath, I started with a grapevine wreath and added some greenery to fill in the space (balsam, pine, cedar, juniper, olive branches). I then added a dangling orange, maroon carnations, evergreen scented pinecones and sprigs of baby’s breath, all topped with (of course) another huge gold bow.
Making Your Own Holiday Wreath
Inspired to make your own wreaths? You totally can – in fact, it’s simple enough that you can even get kids in on the action. No prior experience with flowers or plants necessary.
Everyone has their own design preferences, so rather than giving you a specific recipe, I’ve outlined some tips to help you get started.
Picking Your Elements
Start with a pre-made wreath form.
Although it’s possible to create a wreath from a bare wire wreath form and several large bunches of greens, I recommend starting with a pre-made wreath. My two favorite options are either 1) a standard evergreen wreath or 2) a grapevine wreath. Christmas tree lots will often sell natural wreaths, but they’re also available at Trader Joe’s this time of year (which is where I purchased mine). Meanwhile, a grapevine wreath is a great option for adding your own greens, as the grapevine tangle provides a solid structural base for holding the greens. Grapevine wreaths can be found at Michael’s or other craft stores. My preferred wreath size is about 16 inches in diameter, as it’s a good size for attaching to most doors.
Add some greenery.
Regardless of which wreath form you start with, you may want to add additional greens. Greens can be a great way to give new structure to your wreath form. I also enjoy adding a variety of greens, so that I can really layer different textures into your wreath.
You can source your greenery from lots of different places. Grocery stores and bodegas will often sell mixed bunches of evergreens, which means you can buy just one or two bunches while getting a lot of variety. Another option is buying a “swag,” which is a bundle of evergreens typically hung on a wall or door, much like a wreath. The swags also often include a nice variety of branches and can be easily taken apart so the branches can be used individually.
I always look for a variety of different structures and textures in the greenery. For instance:
Pine and cedar both have soft stems and a very nice drape and their leaves and needles have very different shapes.
Fir and balsam will both be more firm, but also fluffy, providing a lot of volume.
It can also be fun to add a few non-evergreen options. Eucalyptus (all varieties), magnolia and olive are some good options, because they all dry well.
Each of these greens bring in new colors, shapes, and textures, which adds visual interest and depth to the wreath.
Add other elements.
Other natural elements that can be nice to add are oranges, cinnamon sticks, berries, and flowers. Keep in mind that berries and flowers will dry out without a water source, so it’s best to use berries and flowers that will dry nicely. Ilex berries are a good option that are easy to find this time of year. For flowers, I like using small flowers that dry well, such as baby’s breath (gypsophilia), statice or limonium. I particularly like using baby’s breath or other small white flowers, because it can mimic the look of snow on the wreath. Carnations and chrysanthemums are also both pretty long-lasting out of water and will look nice for approximately 24-72 hours.
Most larger flowers, such as roses, require a lot of hydration and don’t last very long without water. If you’d still like to use them, you can always replace the dried flower with a new fresh flower every few days.
It can also be fun to add in unnatural elements, like twinkle lights, glitter balls or even cute ornaments (like the adorable stuffed bird that I added to the holiday wreath). It just adds that touch of whimsy to an otherwise very natural wreath.
Think about scents.
Consider incorporating some elements that bring winter scents to your holiday wreath. In general, the fresh green smell from a wreath will only last a week or so until the branches dry out, so it can be great to add other elements with longer-lasting scent. For example, one of my favorite finds this year was a bag of pinecones from Trader Joe’s that were scented with cedar and balsam essential oil, so they’ll maintain their scent for just a little longer.
Adding Your Elements To The Wreath
Start simple and build up.
It’s always easiest to start out simple, and you can add more later. If you’re feeling overwhelmed with design options, pick just a few elements, but go extra lush with these elements. For instance, you could choose only oranges and pinecones as your decorative elements. Or you could leave out all extra elements and choose to just focus on adding a variety of greens to your wreath for an ultra-simple look.
Alternatively, if you’re playing with a lot of different elements, choose a specific color scheme or a few main focal points first, then fill in the rest of the wreath accordingly. For example, in the holiday wreath I chose a rose gold theme, and the main focal points were the gold, glittery bow and the bird ornament.
Use green spool wire to secure your elements.
The grapevine wreath form is naturally tangled, which makes it easy to add branches or other elements simply by tucking them into the wreath. Similarly, the evergreen wreath is often lush enough that new elements can also be tucked in.
However, when securing elements that can’t be tucked into the wreath, you will need to use green spool wire to secure the elements to the wreath. I like to use green wire because it can be camouflaged in either evergreen or grapevine wreaths, as it blends well with both green and brown. I recommend using 20 - 24 gauge wire, because that wire is thick enough to be sturdy, but not so thick that it is difficult to manipulate. You’ll also want to have wire cutters handy to cut the wire as using scissors or shears (even floral shears) will ruin those tools.
To attach oranges to a wreath, pick an orange that still has its stem. The stem often has bumps and ridges on it from where the leaves are or used to be; you’ll want to secure the wire under a ridge by wrapping the green wire around the steam twice before twisting it. Next, decide where you want your orange to hang – I chose to let the orange dangle quite low, because I wanted a dramatic structure for my wreath. Finally, attach the wire to the wreath by looping it through the grapevine and securing it with another double loop and twist. Trim any excess wire or tuck it into the wreath.
Here’s a video showing how to attach the orange with wire:
Similarly, you can attach pinecones and other elements by looping the wire around the item and securing the other end of the loop to the wreath.
Layer your elements.
Consider layering your elements so that long drapey greenery is in the back and short focal pieces are in the front. For example, in my modern wreath, I layered pine and cedar (which are both long and drapey) in the back and added berries, juniper and incense cedar as focal points in the front. I finished off my greens with olive branches because I liked the contrast of using a non-evergreen branch.
Consider grouping flowers.
Sometimes, a single flower just doesn’t have enough impact. For example, in both of the wreaths I made, I wanted the baby’s breath to be reminiscent of snow, so I added a few mini-bunches of baby’s breath tied with wire, and I also tucked a few sprigs of baby’s breath in individually.
Here’s a video showing how to make bunches of flowers using wire:
Add pops of color.
To provide some contrast from all of the neutral colors, add a colorful pop to one area of the wreath. In my modern wreath, I added several buds of the maroon mini carnation in a loose cluster because I wanted it to look as though it were growing from the grapevine. Because the maroon is a strong color, I kept the buds all close to one another and I placed them in the top left to counterbalance my low hanging orange.
Consider the negative space.
Sometimes, the most effective use of space is to not fill it in at all. For example, in my modern wreath, I decided to create a more dramatic finish at the bottom of the wreath with long branches. Because the bottom of the wreath is so big, I left the top of the wreath bare as a counterbalance. The use of negative space helps the wreath stand out from maximalist holiday wreaths.
Top it all off with a big bow and/or a hanging ribbon.
Giant, glittery bows instantly add drama to your wreath, and they’re also a great way to cover any bare spots in our wreath. Make the bow out of some gorgeous glittery metallic ribbon for a really luxurious look. I recommend pre-making your ribbon into a bow so you know in advance how much space the bow will take up; that way you can arrange your elements with that in mind. There are many great tutorials on the internet already on how to make bows out of ribbon, so I won’t go into the details here. (I recommend this tutorial here and here on making bows.) You can also find pre-made bows at Michael’s.
Secure your bow to the wreath with green spool wire. Cut a length of wire that is about 4 inches long, then loop the wire through the back of the bow so that one half of the wire is above and one half is below the bow, and twist the wire together tightly. You’ll now have two ends of wire of roughly the same length coming from the back of the bow. Use those two ends to attach the bow to the grapevine by looping one wire through the wreath before twisting the two ends together. (Fun tip: you can use this same technique to attach bows to Christmas trees as well.)
Here’s a video showing how to attach a bow to the wreath:
If you’re adding a hanging ribbon, make it into a clear design statement by using some glittery, colorful ribbon, looped through the wreath and tied in a bow. This is an easy way to add a mechanism for hanging the wreath on a nail or hook on your wall or door.
Don’t Worry, Be Free
The most important thing to remember when decorating your wreath is to have fun! One of the best things about making a wreath is that you can always take it apart and start over. (Sabrina and I took the two sample wreaths apart several times during filming.) Don’t be afraid to play with the materials and get creative with placement – sometimes the best designs come about completely by accident.
Happy holidays! Let me know in the comments below if you end up making your own holiday wreath.
Free Pattern: Fabric Gift Bag With A Double Bow
The Christmas season is rapidly approaching, so I thought I would share my pattern for a unique fabric gift bag with a double bow. This is a gorgeous way both to reduce waste from gift wrap and use up leftover fabric from past projects.
To make this pattern, I adapted the technique shown in Pattern Magic, a series of Japanese pattern drafting books that show you how to add amazing sculptural details into your garments. The book shows you how to add this bow detail to a bodice, but I’m too old to be wearing giant bows on my shirts, so I decided to add it to a bag instead. To get the pattern, scroll down to the bottom of this post and click on the link. But before you do that, read on for some important notes on assembly, fabric choice and construction.
Assembling the Pattern
The pattern consists of 14 pages. Make sure you print out the pattern at actual size (not “scale to fit”), so make sure you check your printer settings before hitting print. On page 8, there’s a test square that should measure 4 inches by 4 inches - print that out first and measure it to make sure that everything is printing to the correct scale. If the test square looks good, assemble the pattern by laying out the pages in two rows of seven pages each, then matching up the triangles with the letters. Your pattern should now look like this:
If you’ve never worked with a PDF pattern before and you want more detailed instructions, check out Colette’s several years old but still useful blog post here.
Now that the pattern is assembled, cut out the three pattern pieces (which are the front left half of bag, front right half of bag and extra bow piece, respectively). I have added 1/4 inch seam allowance to the bow ‘arms’ and the extra bow piece - this is shown by the dotted line, so be sure to cut on that line instead of the solid line on that part of the pattern. I didn’t add seam allowance on the outside edge of the bag, and that’s why you don’t see a dotted line on that part of the pattern.
In addition to the three pieces indicated in the pattern, you’ll also need to cut an additional rectangle for the back of the bag. I cut a 14 3/4 inch by 18 5/8 inch rectangle.
The full sized pattern makes a bag that is roughly 14 inches tall by 18 inches wide (to give you some context, that’s big enough to hold a board game box). If you want to make a smaller version, just print the pattern at a smaller scale - for example, the smaller bag in the picture above was made using a version of the pattern printed at 67%, and it makes a finished bag that is about 9.5 inches tall by 12.5 inches wide (big enough to hold some books). If you make this scaled-down version, you’ll need to cut a 10 inch by 13 1/4 inch rectangle for the back of the bag.
Fabric choice
Use a light- to middle-weight woven fabric - it is difficult to tie the bows if you use a bulkier fabric (trust me, I tried making the bag with some leftover wool coating and it was a total disaster). One of my favorite things about this project is you can use fabric scraps from past projects in the extra bow piece. For example, I had some fabric swatches that were donated to me a few years ago by a fashion brand here in NYC, and I pieced them together to make the extra bow piece. It’s a great way to showcase fabrics that have gorgeous patterns or textures, but where you don’t have enough of the fabric to make a full garment.
Construction
The construction on this is fairly straightforward - in essence, you stitch the two halves of the front together, finish the edges of the bow arms, then stitch the second bow onto the hole in the front of the bag and stitch the entire front to the back of the bag. Need more detail? Check out the video tutorial below.
Ready to make your own double bow gift bag? Click on the link below to get the pattern. Happy sewing, and please send me pics if you end up making it!
